KAIWA Grease SAE 140 API GL1

Product Code

description

GL-1 is oil, high quality gearbox, meeting GL1 standard. The oil is used during the operation of the transmission unit under average operating conditions, suitable for the use of unmixed mineral oil.

Utility

Using the proper lubricating oil and following a pollution maintenance plan is the best way to prevent pollution and reduce repair costs. Gear oils for lubricating gears and other moving parts; Cooling and cleaning of debris that abrades the contact surface in gear box.

Good thermal and oxidation stability.

 

Anti-corrosion and absolute anti-rust.

 

Protect motor from wear and good impact.

 

Increase the life of gearbox.

CHARACTERISTIC

  TEST METHOD  

      90       

     140     

 Kinematic viscosity at 1000C, cSt 

ASTM D445

14 - 24

24.2 - 32

Viscosity index (VI)

ASTM D2270

Min 90

Min 90

 Flash point (COC), 0C

ASTM D92

Min 210

Min 215

Water content (by vol) %V

ASTM D97

Max -5

Max -5

(The above are typical figures obtained generally accepted in production but do not constitute specifications)

Recommended for the rear axle, steering gear box, truck and tractor manual parts under light operating conditions.

Preservation in a covered store.

Storage temperature should not exceed 600C.

Keep away from sparks and burning material. Oil containers must be carefully shielded and away from the risk of contamination.

DRUM 180 kg, 17 kg buckets, cans of 0.5 kg or according to customer requirements.